car gps tracker Processing

car gps tracker new generation 4G Cat 1 OBDII vehicle tracker.vehicle tracker not only can locate vehicle location in real time, but also has a variety of alarm functions such as vibration alarm, over-speed alarm and power failure alarm. It also plays the role of supervising drivers’ safe driving to avoid corporate losses. In addition, the administrator can set up an electronic fence, which sends a fence alarm message as soon as the vehicle enters or leaves the area.

Project Details

1. Features

◇ Real-time tracking by APP/Platform

◇ Movement/Ignition on/off alarm

◇ SOS alarm/speeding / ACC detection

◇ Power Cut alarm with internal battery

◇ Angle change update location

◇ Memory storage when signal lost

◇ Set flexible sleep mode

◇ Set GPS not drifting after parking

◇ Remote check SIM card balance fee

◇ Set Less GPRS data mode

◇ Set Driving behavior monitoring

◇ Remote controller set arm or disarm (Optional)

◇ Disable fuel or electricity (Optional)

◇ Vibrate/ACC alarm trigger speaker sound (Optional)

◇ Welcome customization Shell or function

2. Specs.

Content	Specs.
Dim.	854517mm
Network	LTE/GSM/GPRS
Frequency(4G+2G)	LTE-FDD B1/B2/B3/B4/B5/B7/B8/B28/B66 GSM :850/900/1800/1900Mhz
Module & Chipset	SIMCom LTE Cat 1 Module A7670 Series+AT6558R
GPS channel	66
Tracking sensitivity	-165dBm
Location accuracy	<5 meters CEP
Time To First Fix(open sky)	Cold status <35s Hot status <1s
Working voltage	9-36VDC
GPRS Protocol	Class12, TCP/IP
Operating temp.	-20°C to +70°C
Back up battery	200mAh /3.7V Li-Polymer battery
Standby & Working consumption	5mA~50mA
GSM / GPS antenna	Built-in
G-Sensor	Support
Memory storage	2000 data
Ignition status detection	Support
Micro USB interface	Flash firmware/Configuration
Configuration Mode	PC – USB/GPRS /SMS
OTA	Support
Power interface	8 PIN or 4PIN version