The method of using the GPS navigation system is simple. Take the public as an example. The specific steps are as follows: 1. Start the vehicle and turn on the vehicle's center display when the vehicle is stationary.

　　2. Click the "Map" button to enter the map, then select the "Navigation" menu.

　　3. After entering the "Navigation" page, enter the departure and destination according to the prompts, click "Start" to navigate, and the car GPS navigation system can start to work normally.

　　Notice:

　　1. After entering the origin and destination, you can choose from three different route schemes, namely the shortest distance, the shortest time and the least cost.

　　2. Some models are also equipped with a "home" button. Click the "home" button to achieve one-key home navigation through the preset home position.

　　Navigation requirements:

　　1. When setting up navigation, park first, then set. If the navigation is set while the vehicle is moving, there are some safety hazards.

　　2. Try not to put mobile phones and other electronic products in the central control display area to prevent signal interference.

　　3. When installing navigation, be sure to go to a regular car shop to install regular products to prevent quality problems in the future.

Read recommendations:

car gps tracker

fleet management software webfleet solutions

GF30 Magnet GPS tracker with Voice listen

Why can't the indoor GPS positioning cannot be achieved.fleetmanagement webfleet solutions

How to position GPS