mini gps tracker.GPS positioning terminal selection and fixation

source:truck tracking webfleet solutions release time:2023-10-14 Hits: Popular:realtime gps tracker online

　　1. When installing GPS, it should be ensured that the receiving side is facing upwards (sky) and there are no metal objects blocking or shielding above;

　　2. To avoid theft and damage, the host selection should be as concealed as possible;

　　3. Avoid placing them together with emission sources, such as reversing radar, anti-theft devices, and other onboard communication devices;

　　4. It can be fixed with screws or pasted with strong double-sided adhesive of wide sponge;

　　5. Suggested installation location:

　　Inside the car center console

　　Hidden area under the front windshield

　　Hidden area under the front dashboard (with non-metallic skin)

　　Under the trim panel below the rear windshield

　　Inside the front bumper (with a non-metallic surface)

　　Under the wiper plate (with a non-metallic surface)

　　Attention: If the windshield is pasted with an insulation or heating layer, it will reduce GPS reception signal, causing GPS malfunction and inability to locate. At this time, please replace the installation position of the GPS antenna.

　　3. The GPS terminal can be firmly pasted with wide sponge and strong double-sided adhesive

Read recommendations:

gps vehicle tracker Manufacturing

Gps speed limiter Factory

G200(L) -Magnet GPS Tracker

GPS development mode

gps tracker is very power hungry?

Last article：Gps speed limiter.GPS monitoring and dispatching passenger transportation center

Next article：Gps speed limiter.The GPS positioning terminal has the following functions

Related Information

GPS Tracker for vehicles Manufacturing

2023-03-16