With the development of science and technology, the application of locators is becoming more and more widespread. For a car locator, it is necessary to master its correct use. Do you really know how to use the car GPS positioning system? Next, the electronic editor will analyze the correct usage of car locators for everyone.

　　1、 GPS positioning terminals are divided into: wired version and installation free version;

　　In addition, the installation methods of these two car locators are slightly different. The locator of the wiring model needs to be connected to the vehicle's power supply in order to operate normally for 24 hours; The non installation type locator usually determines the standby time based on the locator's battery capacity and working mechanism after a single charge;

　　2、 The startup method of GPS positioning terminal:

　　1. Install the SIM card onto the car locator;

　　2. Charge the locator with electricity/or connect the power supply so that it can be powered on for use;

　　After taking the vehicle or locator away from the outside for a period of time, the locator can be activated for use;

　　3、 The steps for installing a SIM card on a car locator are as follows:

　　1. Open the back cover of the locator or the SIM card slot plug of the locator;

　　2. Insert the SIM card correctly into the SIM card installation according to the card insertion diagram on the locator;

　　3. Close the back cover or slot plug;

Read recommendations:

simple gps tracking Factory

Pet GPS Tracker supplier

G900LS 8 Lines-4G Car GPS Tracker

Gps speed limiterDoes the ultra small button type GPS locator exist

What should I do if I encounter an offline alarm in the car GPS positioner?realtime tracking device