GPS automatic gain control system

　　GPS (Global Position System) is the abbreviation of global positioning system, which aims to accurately locate and monitor ground or air targets in the global scope. With the increasingly extensive application of global spatial positioning information, the positioning services provided by GPS have brought great changes and far-reaching effects to people's lives. Automatic Gain Control (AGC) system is a key module of wireless receiver. For GPS receiver, there are many signals entering the receiver frequency band in practical applications. In addition to useful signals, noise interference and environmental changes will cause signal fluctuation and change, affecting signal processing. Based on the above purposes, a system that can automatically adjust the gain and has a large Gain range is required to Control signal changes, This is the automatic gain control system.

　　The automatic gain control system mainly completes the following two aspects in the receiver: First, prevent the receiver from overloading due to excessive signal. For the received signal, the received signal can be strong or weak due to different distances. When the distance is short, the signal may be too strong, and when the distance is far, the signal may be weak. At this time, the receiver is required to adapt to this change. When the signal is strong, the receiver gain is reduced, and when the signal is weak, the receiver gain is increased. Second, the compensation receiver gain is unstable. When the receiver is working, the voltage instability, process parameters and temperature changes will cause gain fluctuation. Automatic gain control is to compensate the error caused by the receiver itself.

Read recommendations:

portable gps tracker wholesaler

gps vehicle tracker maker

G900LS 8 Lines-4G Car GPS Tracker

Introduction to GPS application scope

Causes of lithium battery explosion