1. The factory price of the device's traffic card has been fully installed, and there is no need to reconfigure the card after receiving it.

　　2. It is not recommended to replace the device with a traffic card configured for the device.

　　3. Before installing the device, turn the power switch next to the flow card to ON.

　　The position of the power switch can be determined by the device indicator light. Before the device is connected to the vehicle power, if the power switch is turned to ON, the device indicator light will flash. If the power switch is turned to OFF, the device indicator light will not flash (it is recommended to turn on the device power first before wiring)

　　4. To ensure that the equipment can search for Beidou and GPS satellite signals well, it is recommended to place the equipment antenna in an open area and try to stay away from electronic and electrical interference.

　　5. Try not to place the equipment in areas such as iron pipes, barrels, navigation screens, etc. that may be affected by GPS satellite signals.

　　6. If your device needs to be renewed, please contact the dealer at the time of purchase to renew it. Please do not renew it yourself.

　　7. Regarding the waterproof issue of the equipment, the wiring GPS locator does not have waterproof performance. When installing, be sure to place the equipment in a place that is not easily exposed to water.

Read recommendations:

Dog gps tracker Processing

GPS Tracking

3 Years Disposable Asset GPS Tracker

Advantages and characteristics of third-generation chips.gps tracker auto manufacture

Differences between GPS cold start and hot start