1. GPS positioning terminals are divided into: wiring models and free installation models;

　　In addition, the installation method of these two car positioners is slightly different. The positioner of the wiring model needs to connect the power of the vehicle to operate normally; and the installation positioner is usually used to charge The battery capacity and working mechanism of the device determine the standby time;

　　Second, the GPS positioning terminal starts method:

　　1. Install the SIM card to the car positioner;

　　2. Charge/or connect the power supply to the locator so that it can use it to use it;

　　3. After bringing the vehicle or locator away from the outdoor for a while, the positioner can be activated;

　　Third, the operation steps for installing the SIM card of the car positioner are as follows:

　　1. Open the back cover or positioner SIM card slot plug;

　　2. Put the SIM card root according to the card diagram on the positioner to correctly insert the SIM card installation;

　　3. Close the back cover or card slot plug;

Read recommendations:

Dog gps tracker Vendor

4G GPS Tracker wholesaler

C32Plus (9~90V E-bikes/Motorcycle/Car gps tracker)

GPS management system-efficient management of your vehicle

GPS data interpretation.fleet gps tracking Processing