In real life, due to various reasons, some friends often worry that their vehicle has been deliberately installed with a GPS tracker, or they already know that the GPS device is installed and cannot be removed. It is recommended to contact the GPS device installation unit and individual through formal channels to solve this problem. If they cannot be contacted, they need to investigate step by step.

　　To investigate the installation location of GPS devices, the first step is to understand which types of GPS are currently available

　　According to different installation and disassembly methods, GPS locator devices can be roughly divided into three types

　　1. Plug and Play. It is directly connected to a certain interface in the car and powered on for operation. Generally, there are three types of GPS locator devices, including OBD interface, cigarette lighter interface, and USB interface. These types of GPS locator devices are generally exposed on the interior surface of the car, and can be detected by careful observation.

　　2. Wiring working type. Traditional GPS locators, which require the connection of on-board batteries for operation, are generally installed inside the vehicle and are relatively concealed, making it difficult for non GPS professionals to detect them. However, due to the need for wiring and the relatively fixed installation position, they can also be detected through line inspection. In order to prevent illegal individuals or loan car owners from maliciously dismantling GPS, this website does not provide a detailed introduction.

　　3. Long wait model GPS. This type of GPS has a built-in battery and does not require a car battery, making it generally difficult to detect. However, due to the impact of battery standby time, the long standby GPS series can also be divided into two types: one is powered by rechargeable batteries. This type of GPS requires interval time to remove the device for charging, and the installation position is relatively easy to remove. Finding is also relatively simple. The standby time generally varies from 7 days to three months depending on the device's operating frequency. If the battery is depleted and there is no chance to charge, the device will automatically fail. Another type is the non rechargeable long standby series, which typically lasts for about 3 years and does not require charging during this period, making it difficult to discover and disassemble. However, due to the impact of battery power, this type of GPS usually only sets a working frequency for a long time interval, such as positioning once a day, and generally does not leak detailed vehicle location information.

Read recommendations:

fleet gps tracking Factory

real-time gps tracking

G900LM iButton GPS Tracker

The GALILEO GPS system consists of 10 signals in four frequency bands.

GPS navigation solution