gps tracker with magnet

TK08A is a GPS Tracker for 9~90V ebike/scootor/vehicles. It's working based on GSM/GPRS network and GPS satellites, this product can locate and monitor any remote targets with built-in antennas by SMS or GPRS. With its compact design, the device can easily connect with car battery to acquire real time data, such as car position, ignition status, speed data, also can remotely disable the engine to stop car for anti-theft purpose. And all these information will be upload via GPRS to server for further analysis, statistics, storage and more extensive application.

Producttion Application

◆ Fleet management and vehicle tracking

◆ Car service shop

◆ Vehicle insurance

◆ Motorcycle and electric bike anti-theft

◆ Working range 9-90V DC

Project Details

Product Description

Producttion Application

◆ Fleet management and vehicle tracking

◆ Car service shop

◆ Vehicle insurance

◆ Motorcycle and electric bike anti-theft

◆ Working range 9-90V DC

Production Features

◇ Vehicle/scooter/motorcycle tracking

◇ Real-time tracking by SMS/Platform/APP

◇ Speeding/Geo-fence alarm

◇ ACC ON SMS alarm

◇ Power Cut alarm with built-in battery

◇ Vibration alarm

◇ Power-saving mode during parking

◇ Support memory storage when GSM lost

◇ Support angle change upload location

◇ Disable fuel or electricity

Specs.

Content	Specs.
Dim.	78(L) x40(W)x15(H) mm
Network	GSM/GPRS
Frequency	850/900/1800/1900 MHz
GPS chipset	MTK high sensitivity chip
GPS channel	66
Tracking sensitivity	-165dBm
Location accuracy	<10 meters CEP
Time To First Fix(open sky)	Cold status <35s Hot status <1s
Working voltage	9-36VDC or 9-90VDC
GPRS Protocol	Class12, TCP/IP
Operating temp.	-20°C to +70°C
Back up battery	200mAh /3.7V Li-Polymer battery
Standby & Working consumption	5mA~50mA
GSM / GPS antenna	Built-in
G-Sensor	Support
Geo-fence	Support
Angle change upload location	Support
Ignition status detection	Support
Memory Capacity	1400 positions
Micro USB interface	Flash firmware/Configuration
Configuration Mode	PC – USB/GPRS /SMS
Power interface	4 PIN(Power/ACC/Relay)