The installation of GPS locator equipment is directly related to the stability of GPS positioning monitoring applications. If there are wiring errors, poor installation positions, etc., it can lead to car online rate, ineffective GPS positioning, etc.

　　During the installation process of GPS locator equipment, the principle is to connect the battery power supply (continuous power supply), ensure that there is no metal cover above the GPS antenna, be waterproof, and ensure that the equipment is stable and not easily detached.

　　The GPS locator device has a small size and is easy to install. In order to ensure the stability of the device, our company's technical personnel usually come to the door for installation. If you need to install it yourself, please follow the above principles for specific vehicle models. The general installation position of a car is shown in the figure below. The optimal position is under the driver's or passenger's seat panel under the front windshield of the car. Firstly, there is no metal obstruction above this position, and the GPS signal is good. Secondly, the car fuse box is generally located at this position, making it easier to find the power line.

　　If it needs to be installed in other locations, such as in the car bumper or under the rear windshield, please fix the GPS antenna to a location without metal shielding. The Mount Taishan locator needs to fix the equipment to a location without metal shielding above. You can connect the power cord from the installation location shown in the figure.

Read recommendations:

fleet gps tracking manufacturer

Cantrack G05

G900LS J16-4G Car GPS Tracker

The manufacturer believes how to effectively prevent the vehicle positioning system from being destr

GPS Knowledge Base: What is RTK Technology