How to solve the problem of inaccurate car GPS locators?

　　Firstly, let's take a look at why GPS locators are inaccurate and have large errors.

　　GPS positioning accuracy, generally within 10 meters if obtaining Beidou or GPS signals; If it is a signal difference, there will be a significant error when obtaining the base station, i.e. LBS signal, usually around 100 meters, which is related to the local base station density. Most people report inaccurate positioning due to the positioning of the base station.

　　How to solve the problem of inaccurate car GPS locators?

　　How can we solve this problem?

　　1. Replace the installation position of the device. The installation location of the device will directly affect the effectiveness of the device in searching for GPS signals. If the effect is not good, you can try changing the position.

　　2. Pay attention to the antenna position of the device. When installing an external antenna, make sure the antenna is facing upwards, away from iron, and not facing downwards or towards iron.

　　3. Leave the interference source. For example, engines, alarms, motors, etc.

　　4. Replace with a new device. If your device was purchased a few years ago, it is recommended to replace it with a new one. The performance of electronic products after updates will definitely be better than before, so replacing the equipment will achieve a certain effect.

　　In summary, the inaccurate positioning of GPS locators is related to multiple factors. Firstly, identify the cause, try different methods, eliminate the problem, and solve it in a targeted manner.

Read recommendations:

car gps tracker manufacture

gps vehicle tracker manufacturer

GF30 Magnet GPS tracker with Voice listen

Bluetooth GPS

Introduction to GPS application scope