Many people bought the car GPS positioner, but they did not know how to install it. After buying the positioner back, many car owners throw them out of the car and start using it, so we don't recommend it. Because the positioning accuracy of the car GPS positioner, in addition to the workmanship, material, and chip of the device itself, it also depends on the environment and external weather factors of the GPS positioner. So how to install the GPS positioner? Below we teach you and quickly master the installation method of the car GPS positioner.

　　The first step needs to buy a hardware device for a car GPS positioning terminal;

　　The second step needs to prepare a IoT card, because the positioner obtains the location information through the GPRS in the Internet of Things card, so this IoT card is essential;

　　The third step is to log in to our 365 position online platform, because the vehicle location information of the vehicle GPS locator needs to be converted in the background through the software, and then it can be displayed in the form of the map. The current position is clear at a glance.

　　After preparing the above hardware equipment, follow the following methods to operate:

　　Step 1: Install the IoT card in the vehicle positioning terminal;

　　Step 2: Repeat the vehicle positioning terminal, the wiring needs to be power -on with the battery positive and negative polar wiring; if the installation is free of charge, the positioner is required to charge the positioner in advance;

　　Step 3: Drive the vehicle out for a distance to detect whether the GPRS in the terminal device can get the location information;

　　Step 4: Log in to check the car platform to check whether the vehicle's driving trajectory and positioning information are accurate.

Read recommendations:

Gps speed limiter Manufacturing

mini gps tracker manufacturer

G07L 4G GPS Tracker

Gps speed limiter.Install GPS car locator to avoid vehicle theft and rescue

The difference between Beidou satellite and GPS.Pet GPS Tracker Manufacturing