Installation method for automotive GPS locator equipment

source:truck tracking webfleet solutions release time:2023-09-13 Hits: Popular:realtime gps tracker online

　　(1) Check equipment

　　Check if the appearance of the car GPS locator equipment is good and if the relevant accessories are complete.

　　(2) Installing SIM card

　　Open the device and place the SIM card in the card holder. Please avoid damaging the card holder with excessive force, and do not insert or unplug the SIM card while the locator device is powered on. Please ensure that the SIM card has internet access function.

　　(3) Requirements for selecting terminal installation location

　　A. Waterproof: It is recommended to choose a location that is not prone to water ingress to ensure the dryness of the GPS locator terminal. Attention should be paid to keeping it away from the air conditioning outlet to prevent condensation water from accumulating inside the terminal and seriously affecting the product's service life when the temperature difference changes.

　　B. Shockproof: The GPS locator terminal cannot be installed in a position with significant long-term vibration in the air.

　　C. Anti interference: The GPS locator terminal should be kept away from electronic devices such as audio, video, and intercom in the vehicle to prevent conducted and radiated interference.

Read recommendations:

gps tracker with magnet Vendor

obd-II port gps tracker

G900LS-4G Car GPS Tracker

GPS setting RF front end

Schematic diagram of GPS satellite navigation system

Last article：Precautions for using rechargeable GPS car locator terminals

Next article：Serial Number Cable Color Wiring Description (Vehicle Signal Line).obd-II port gps tracker Factory

Related Information

Cantrack TK100

2023-03-16

gps vehicle tracker Vendor