Ground control section: It is the core monitoring and control system responsible for maintaining the GPS satellite orbit and launch plan. It includes five ground monitoring stations, three control centers, and some service institutions. The monitoring station determines the orbit position, clock deviation, and other parameters of the satellite by receiving satellite signals, and transmits these data to the control center for analysis and processing. The control center generates satellite navigation data and launch plans, and sends commands to satellites in orbit.

　　Space control segment: It is a system composed of satellites, including 24 satellites and 4 backup satellites. These satellites are high-precision clocks and electronic devices, and each satellite rotates the Earth twice a day. Satellites transmit radio signals to Earth, which can be captured by ground equipment and receivers and used to calculate position and time.

　　User segment: It is the part that uses the GPS system, including the GPS receiver and navigation equipment. The user captures the signal transmitted by the satellite through a GPS receiver, which contains information about the satellite's position, speed, and time. The GPS receiver sends this information to the navigation device, which calculates the user's location and displays it on the map.

Read recommendations:

obd2 tracker

simple gps tracking Manufacturing

3 Years Disposable Asset GPS Tracker

Introduction to GPS Positioning Principles.car gps tracker manufacture

GPS active ranging and passive range.car gps tracker Solution