Using GPS trackers in cars is usually very simple, but the use of equipment produced by each enterprise will be slightly different.

　　There are generally two types of car positioner, wiring and wireless vehicle lockers. Some companies will distinguish or name the GPS positioner according to different functions.

　　Wiring car GPS tracker takes effect by inserting the car diagnosis (OBD-II) connector. This OBD connector is usually under the dashboard near the driver's leg. You can continue to supply power on the equipment without external power supply. The use time is long, which is very suitable for the management of corporate fleet.

　　Some car trackers are designed to insert a cigarette ornament socket, which limits that you can install them. These trackers are easy to install and use. What we need to pay attention to is that when you do not drive, some of the trackers will continue to obtain power from your battery. In this case, you need to pull out the tracker to prevent the battery from exhausting.

　　Wireless car GPS tracker is generally powered by battery inside the device, which means that they can be installed almost anywhere and high flexibility. Because there is no external power supply, it is necessary to remove and charge this type of tracking regularly, otherwise it will stop working. Therefore, the length of standby time is a standard for measuring the quality of this positioner

Read recommendations:

car gps tracker custom

gps vehicle tracker wholesaler

P901 4G ID Card GPS Tracker Smart Walkie-talkie

What is the difference between GPS positioning manufacturers and in car reverse imaging WiFi and 4G.

GPS FPGA Program Design